Remove Roller Brush- How to Remove Roller Brush from Shark Vacuum Cleaner

The vacuum cleaner is a trusted companion of many people in this busy life. With the support of the vacuum cleaner, you can clean up the house without even touching the dirt with hand. It helps to make your life easier and your house cleaner. But the cleaner itself also needs cleaning sometimes. The roller brush is one of the most important parts of your Shark vacuum that needs cleaning or replacement. And to do either of that, you need to know how to remove roller brush from Shark vacuum.

After a long time of using the vacuum for cleaning the carpet and floor, the roller brush can catch lots of debris and dust. Moreover, the Shark’s roller brush can be made of different materials such as plastic, wood, and metal depending on the designs of the models.

When you find out that your Shark vacuum is not cleaning up the floor as well as it used to, it is the time for you to check the brush. If the roller brush accumulates a lot of dirt on the surface, it cannot effectively wipe out the dust on the floor. And to have your machine working on its best, you need to wash the brush on a regular basis.

And the brush also does not work properly if it gets older. If you purchased your vacuum a long time ago and the brush tends to be grazed, you need to remove this brush and replace it with a new one for your Shark vacuum.

On the other hand, with the rapid advance of technology, some latest Shark models have the self-cleaning function. Those machine does not require your help to clean up their brushes. But, you still need to know how to remove the roller brush from Shark vacuum for later replacement when it wears out.

In this article, I will tell you how to remove the roller brush from the Shark vacuum. Using this method, you can have your machine working perfectly.

Roller Brush from Shark Vacuum

Step by Step Guide on How to Remove Roller Brush from Shark Vacuum

To keep the cleaning job effective, sometimes you need to wash the brush carefully. I will share with you four easy steps that you can do by yourself safely at home.

Step – 1: Unplug your Shark vacuum from the electric outlet

If you don’t unplug the Shark vacuums, it could cause you an electric shock. For your safety purpose, don’t just switch off the power, unplug the vacuum so that it doesn’t have any connection with the electric power source.

This will ensure that electricity will not harm you during the process.

Step – 2: Find the roller brush

The next thing you need to do is find the position of the roller brush. There are slight differences between the locations of the roller brush depending on the models. Usually, you can find it on the underside of the vacuum.

 While finding the roller brush, to make the process easy, you can lay down your machine. Laying down the vacuum on the floor also helps you access the screws on the bottom of the machine. So you can remove the bottom part of the vacuum in an easy way to look for the roller

Step – 3: Loosen the screws

Once you have located the roller brush, you have to unscrew the screws in order to take the brush out. Apparently, the box of the new Shark vacuum always gives a set of suitable screwdrivers for users.

You have to find the screwdrivers head that fit to loosen those screws in the bottom. After unscrewing each screw, you should put them in a container or a box so that you will not lose any of them as well as you will be able to find them easily when you reattach the brush.

Step – 4: Remove the brush from the machine

Now you are at the final step of the process. If you have completed all the above steps, you will find it easy and quick to pop the roller brush out of the vacuum’s body. When one end of the roller slides out, all you need to do is pull another end of its belt. Therefore, you have successfully removed the roller brush of your Shark vacuum.

In some cases, it is a bit difficult to remove the brush because it is stuck in with the other components. In such a case, you can try to rotate the brush in a counterclockwise direction until it pops out.

Some Tips for You

Now, as you know how to remove the roller brush from the Shark vacuum, you need to take attention at some points below.

Safety should always come first. You must make sure that you are following all the safety instructions carefully.

And if you think you will not be able to do the task at home, you should never do that. If you are not sure whether you can do it or not, always call a professional to do the job.

Last but not least, try to protect your vacuum and be careful while you pull its components out.


In this article, I have provided you with a detailed step by step guide on how to remove the roller brush from the Shark vacuum. Regardless of how modern your vacuum is, you need to detach the roller brush from the vacuum to clean it or to replace it. Follow the above method to remove the roller brush safely and quickly.

Categories Blog

1 thought on “Remove Roller Brush- How to Remove Roller Brush from Shark Vacuum Cleaner”

  1. Thank you so much for such an informative piece of information 🙂
    If anyone interested similar one’s have a look here



Leave a Comment